CNC Tilting Table - Taiwan CNC Tilting Table

Model		TRNC-125		TRNC-170		TRNC-210
Worktable diameter		Ø 125mm		Ø 170mm		Ø 210mm
Table height (horizontal position)		236mm		264.5mm		264.5mm
Overall height (vertical position)		260mm		388.5mm		388.5mm
Table center height (vertical position)		150mm		198.5mm		198.5mm
Center bore diameter		Ø 25H7 mm		Ø 35H7 mm		Ø 45H7 mm
Spindle hole diameter		Ø 25 mm		Ø 35 mm		Ø 35 mm
Width of T-slot		12H7 mm		12H7 mm		12H7 mm
Width of Guide-block		14H7 mm		18H7 mm		18H7 mm
Servo motor (FANUC)		Rotary	Inclination	Rotary	Inclination	Rotary	Inclination
		α2/3000	α2/3000	α3/3000	α3/3000	α3/3000	α3/3000
Servo motor (mitsubishi)		HA-33NT	HA-33NT	HA-33NC	HA-33NC	HA-33NC	HA-33NC
Total seed reduction ratio		1:90	1:180	1:90	1:120	1:90	1:120
Minimum input increment		0.001°		0.001°		0.001°
Table rotation speed		33.3 r.p.m	16.6 r.p.m	33.3 r.p.m	25 r.p.m	33.3 r.p.m	25 r.p.m
load capacity	0 tilting angle	50kg		50kg		50kg
	0 ~90 tilting angle	35kg		35kg		35kg
Allowable turntable torque		8kg.m		15kg.m		15kg.m
Max. diameter of work piece		125mm		170mm		210mm
Clamping torque (pneumatic pressure 5kg/cm)		8.5kg.m	12kg.m	16kg.m		16kg.m
Rotation axis	indexing accuracy	40"		20"		20"
	repeatability	4"		4"		4"
Inclination axis	indexing accuracy	60"		60"		60"
	repeatability	4"		4"		4"
	tilting angle	-40°~ +120°		-20° ~ +140°		-20° ~ +140°
Net weight		140kg		150kg		150kg

Servo motor position is not changed with shaft tilting to prevent vibration while cutting.

Model			TRNC- 255		TRNC- 320		TRNC- 400
Worktable diameter			Ø 255		Ø 320		Ø 400
Table height (horizontal position)			315		350		420
Overall height (vertical position)			395		450		605
Table center height (vertical position)			235		280		360
Center bore diameter			Ø 40(H7)		Ø 100(H7)		Ø150(H7)
Spindle hole diameter			Ø 32		Ø100		Ø150
Width of T-slot			12(H7)		14(H7)		14(H7)
Width of Guide-block			18(H7)		18(H7)		18(H7)
Servo motor (FANUC)	Rotary	Fanuc	α3		α8i		α12i
		Meldas	HA40		HA80		HF-203S
	Inclination	Fanuc	α3		α12i		α12i
		Meldas	HA40		HA100		HF-203S
Total seed reduction ratio			1:360	1:360	1:80		1:180
Minimum input increment			0.001°	0.001°	0.001°		0.001°
Table rotation speed			8.33rpm	8.33rpm	16.6rpm		16.6rpm
load capacity	0 tilting angle		100		200		300
	0 ~90 tilting angle		50		100		150
	movable load movement on the table		16		89.7		110
Inertia force			6.4		26		61
Max. torque of worm gear			48		120	185
Max. diameter of work piece			Ø255		Ø320		Ø400
Rotation axis	Clamping torque(kg-m)		50(hydraulic pressure 35kg/cm²)		85(hydraulic pressure 35kg/cm²)		110
	Indexing accuracy		15		15		15
	Repeatability		4		4		4
Inclination axis	Clamping torque (kg-m)		50(hydraulic pressure 35kg/cm²)		1450(hydraulic pressure 35kg/cm²)		170
	Tilting accuracy		60		60		60
	Tilting angle		±110°		-25°~+125°		4
Net weight			285		711		911

Relative Product :