Heavy Duty CNC Rotary Table

Home > Products > Heavy Duty CNC Rotary Table

Heavy Duty CNC Rotary Table / MRNC-500 / MRNC-630

• Worktable diameter 500 and 630 mm. (vertical and horizontal application)
• Dual lead worm drive for greater transmission torque.
• Hydraulic clamping system assures powerful clamping.
• Minimum indexing angle of 0.001°.
• Reduced motorguard is available.

Heavy Duty CNC Rotary Table / MRNC-800 / MRNC-1650

• Worktable diameter 800mm. (horizontal application)
• Dual lead worm drive for greater transmission torque.
• Hydraulic clamping system assures powerful clamping.
• Minimum indexing angle of 0.001°.

Specification Unit: mm

Heavy Duty CNC Rotary Table MRNC-500

Model		MRNC-500/500N*
Worktable diameter		500mm
Table height (horizontal)		300mm
Center height (vertical)		310
Overall height (vertical)		565
Spindle hole diameter		50
Center bore diameter		50 H7
T-slot size		18 H7
Guide block size		18 h7
Number of worm gear teeth		90
Servo motor (Model as required)		FANUC	MELDAS
		12 I0S	HA100
Speed reduction ratio		1/180
Minimum input increment		0.001°
Table rotation speed		11.1r.p.m (motor 2000r.p.m)
Clamp torque & Clamp method (kg-m)		250Kg-m (hydraulic Pressure 35kg/cm2)
Cumulative indexing accuracy		15"
Repeatability		4"
Load capacity (kg)	Horizontal	600kg
	Vertical	250kg
Allowable inertia force		185.2kg-cm-sec2
Max torque capacity of worm gear		250kg-m
Allowable work piece diameter		500
Net weight (motor excluded)		458kg
* Optional Accessories: Manual tailstock, hydraulic power unit pneumatic/hydraulic converter, "Pioneer" single axis controller, manual chuck, hydraulic chuck, and flange. * Note: "N" means shortened motor cover. Contact us for shortened sheet metal drawings.

Heavy Duty CNC Rotary Table MRNC-630

Model		MRNC-630/630N*
Worktable diameter		630mm
Table height (horizontal)		325mm
Center height (vertical)		400
Overall height (vertical)		760
Spindle hole diameter		62
Center bore diameter		60 H7
T-slot size		18 H7
Guide block size		18 h7
Number of worm gear teeth		72
Servo motor (Model as required)		FANUC	MELDAS
		12 I0S	HA100
Speed reduction ratio		1/180
Minimum input increment		0.001°
Table rotation speed		11.1r.p.m (motor 2000r.p.m)
Clamp torque & Clamp method (kg-m)		450Kg-m (hydraulic Pressure 35kg/cm2)
Cumulative indexing accuracy		15"
Repeatability		4"
Load capacity (kg)	Horizontal	800kg
	Vertical	400kg
Allowable inertia force		405kg-cm-sec2
Max torque capacity of worm gear		420kg-m
Allowable work piece diameter		630
Net weight (motor excluded)		780kg
* Optional Accessories: Manual tailstock, hydraulic power unit pneumatic/hydraulic converter, "Pioneer" single axis controller, manual chuck, hydraulic chuck, and flange. * Note: "N" means shortened motor cover. Contact us for shortened sheet metal drawings.

Heavy Duty CNC Rotary Table MRNC-800

Model		MRNC-800
Worktable diameter		800mm
Table height (horizontal)		320mm
Center height (vertical)		-
Overall height (vertical)		-
Spindle hole diameter		70
Center bore diameter		60 H7
T-slot size		18 H7
Guide block size		22 h7
Number of worm gear teeth		120
Servo motor (Model as required)		FANUC	MELDAS
		12 I0S	HA100
Speed reduction ratio		1/360
Minimum input increment		0.001°
Table rotation speed		5.5r.p.m (motor 2000r.p.m)
Clamp torque & Clamp method (kg-m)		700Kg-m (hydraulic Pressure 35kg/cm2)
Cumulative indexing accuracy		15"
Repeatability		4"
Load capacity (kg)	Horizontal	1500kg
	Vertical	-
Allowable inertia force		1225kg-cm-sec2
Max torque capacity of worm gear		800kg-m
Allowable work piece diameter		-
Net weight (motor excluded)		1015kg
* Optional Accessories: Manual tailstock, hydraulic power unit pneumatic/hydraulic converter, "Pioneer" single axis controller, manual chuck, hydraulic chuck, and flange. * Note: "N" means shortened motor cover. Contact us for shortened sheet metal drawings.

Heavy Duty CNC Rotary Table MRNC-1650

Model		MRNC-1650
Worktable diameter		1650mm
Table height (horizontal)		450mm
Center height (vertical)		-
Overall height (vertical)		-
Spindle hole diameter		77
Center bore diameter		75 H7
T-slot size		28 H7
Guide block size		22 h7
Number of worm gear teeth		180
Servo motor (Model as required)		FANUC	MELDAS
		22 I0S	HA200
Speed reduction ratio		1/720
Minimum input increment		0.001°
Table rotation speed		2.08r.p.m (motor 2000r.p.m)
Clamp torque & Clamp method (kg-m)		1000Kg-m (hydraulic Pressure 35kg/cm2)
Cumulative indexing accuracy		15"
Repeatability		4"
Load capacity (kg)	Horizontal	8000kg
	Vertical	-
Allowable inertia force		23000kg-cm-sec2
Max torque capacity of worm gear		2200kg-m
Allowable work piece diameter		-
Net weight (motor excluded)		3000kg
* Optional Accessories: Manual tailstock, hydraulic power unit pneumatic/hydraulic converter, "Pioneer" single axis controller, manual chuck, hydraulic chuck, and flange. * Note: "N" means shortened motor cover. Contact us for shortened sheet metal drawings.

TOP